Comar Fluid Power Comar Fluid Power
Comar Fluid Power
Search Comar Fluid Power website

Comar Fluid Power

Comar News

The latest news at Comar:

Aerospace News
Comar feature in the British Midlands Aerospace Brochure on A380 Airbus (see link) as a testrig supplier. We supplied test rigs for testing the Wing Tip Brake & Power Drive Unit on A380.
http://www.thebritishmidlands.com/common/pdf/resources/
AerospaceBrochure-ni2BEHKo1ZeZv6p.pdf
 
Expertise in design
Our test rig design engineers utilize CATIA V5 or SolidWorks CAD software combined with COSMOSWorks® for design validation.
Our link with GM Design adds further expansion our areospace test rig design experience which includes:
  • Qualification test rigs - JSF, A380, A340, 787, A400M
  • Strength test rigs and fixtures
  • Vibration fixtures - A340, A380.


  • Military aircraft actuation systems test rigs - JSF, Eurofighter
  • Commercial aircraft acuation systems test rigs - A310, A320, A340-600, A380, 787, A400M, AS907, SAM146, EMBRARER
  • Individual units and complete systems test rigs
  • Production test rigs - 7878, JSF, A380, A400M, CRJ700, EMBRAER, SAM146, NH90

Products

Flaretite www.flaretite.com

COMAR are currently distributing in the UK Flaretite 37° JIC seals, made from 304 stainless steel, it is designed to eliminate weeping from both new and previously weeping joints that are not severely damaged. These joints have so far been used to solve leaks on existing systems, but will be installed as standard on all new systems with flared joints.

Key Design Features

  • Available in sizes: 04 (1/4"), 06, 08, 10, 12, 16, 20, 24, and 32 (2").
  • Seal Materials: 304 Stainless Steel, 316 Stainless Steel, or Copper
  • Targets the most vulnerable point in the piping systems, the flared connection.
  • Unique combination of ribbing and Loctite sealant locks the joint tight.
  • Minimizes galling and deterioration of metal on flared joint.
  • Low cost method of elimating the need for high cost product replacement or rework.
  • Seals the mating faces of any standard JIC flare joint.
  • Eliminates electrolysis that causes corrosion.
 

Midlands Aerospace Alliance

BSI Registered Firm - Certificate No. FM 35717

Comar Engineering Services Ltd, Unit D, Key Industrial Park, Planetary Road,
Wednesfield, Wolverhampton, West Midlands WV13 3YA
 
t: +44 (0)1902 383000
f: +44 (0)1902 739430

The British Fluid Power Distributors Association

Copyright © 2001-2007 Comar Engineering Services Ltd
site design: shropshire web design

comar engineering, comar engineering services, aerospace service hydraulics, vickers valves, vickers service centre, vickers pumps, vickers hydraulics, hydraulic test rigs, hydraulic cylinders maintenance, hydraulic actuators maintenance, hydraulic systems design, hydraulic system design

hydraulic valves, hydraulic components, solidworks cad drawings, solid works cad drawings, aeronautical products, fluid power designs, fluid power distributors, fluid power components, pneumatic air controls, pneumatic air systems, pneumatic air designs, 3d cad designs

Comar Fluid Power - We are the leading providers of hydraulic systems design and hydraulic components. Since 1978 our expert team We are able to provide advice on product selection, hydraluic system design, repair and organised maintenance. Our services and products have been applied throughout a range of sectors including aeronautical, aerospace, marine, mining, plastics and steel making. The services in our range include fluid power designs and pneumatic air designs as well as solidworks cad drawings and 3d cad designs. Products we can supply range from pneumatic air controls and hydraulic valves to vickers hydraulics and fluid power components too. Our expert, friendly staff are always ready to advise and answer any of your questions and enquiries. Feel free to contact us today.